Model 312 Portable GCClick here to enlarge
- PID Analyzers offers a new lightweight portable GC for environmental, quality control, natural gas... applications.
- The base Model 312 comes with syringe injection, oven, power supplies & Pentium PC with Windows XP (embedded) and PeakWorks chromatography software in a rugged plastic case.
- Get a Quote now!
|Detectors:||Species measured:||Detection Limit:|
|Photoionization detector (PID), Flame ionization detector (FID), Thermal conductivity detector (TCD), Flame photometric detector (FPD), Far UV absorbance (FUV) detector, Catalytic combustion detector (CCD)||PID & FID: Organics (VOCs by PID or FID) and inorganic species (H2S, NH3, AsH3… ) that can be ionized by the PID lamp (9.5, 10.6 or 11.7 eV)
TCD: Universal detector- fixed gases (O2, N2, CO…), organic and inorganic compounds, very sensitive for H2, He, Xe
FPD: Selective response for S or P compounds
Far UV: Nearly universal response for organic and inorganic compounds
CCD: Combustible compounds such as hydrocarbons
|PID - 0.5 ppb benzene
FID - 50 ppb benzene
TCD - H2- 10 ppm; O2 150 ppm
|Linear Dynamic Range:||Sensor(s):||Precision:||Response time:|
|PID - 108 FID - 2 x 106 TCD - 2 x 104 FPD- S - 103; P 105 Far UV - 106 CCD - 5 x 104||1 or 2 detectors||+/- 1-2% of reading||Depends on retention times|
|Sample Flow Rate:||Injection:||Span Drift:||Zero Drift:|
|> 0.5 LPM||On-column syringe injection or automatic with 6 port gas valve (optional)||<1% over 24 hours||NA- autozero on each run|
|Power consumption:||Dimensions:||Weight:||Instrument operating conditions:|
|< 50 watts maximum; 115 VAC, 0.5 amps (12 VDC 5 amps)||Enclosure - 18.75''x 13.75'' x 7.5''||Fiberglass case - 27.5 pounds||5-40 degrees C, 0-95% RH (non-condensing)|
|PID Lamps||FID||FPD||Ease of calibration|
|Our 9.5 and 10.6 eV lamps remain the best in the business since we developed them over 30 years ago.||Our very sensitive FID has flame out sensor that will shut off the hydrogen if the flame goes out.||Our very sensitive FPD has flame out sensor that will shut off the hydrogen if the flame goes out.||Manual.|
|Display||PC||Operating system||Peak Detection & System Operation|
|Our 7'' Color VGA display (640 x 480 resolution) is easy to read. The display is a touch screen.||Embedded Pentium Computer with > 1 GByte of RAM; data storage on 1 Gbyte USB memory stick.||Windows XP® embedded stored on 2.5 GByte smart card (the PeakWorks program and all data are on the memory stick.||Controlled by our 32 bit PeakWorks software program with more than 20 years of development.|
|ADC||Autoranging||Autozero||Programmable Voltage/current output|
|Our 16 bit ADCs provide a resolution of 1 part in 64,000 and our signal algorithm minimizes noise by signal averaging in the msec range; the ADC can acquire positive or negative signals.||The 312 has 3 ranges with computer controlled autoranging- x1, x 10, x 100.||Beginning of each run.||0-1VDC.|
|Digital outputs||Battery life||Carrier gas||Programmable setpoints|
|USB connection.||3-4 hours; can operate off cigarette lighter adapter.||50 liters at 1500 PSI; typical capillary column 15-20 cc/min; typical packed column 30-40 cc/min.||The low and high setpoints (depends on the options) can be customer programmed for each point and/or compound.|
Typical column diameter: 3.5''
Battery: 25-50 Degrees Celcius
External power: 25-100 Degrees Celcius