Model 115 Portable FID Analyzer
Click here to enlarge
- The Model 115 is an FID based Analyzer for measuring total hydrocarbons including methane to 50,000 ppm. It has enhanced features such as a faster response time, extended linear range and datalogging (see below).
- The 115 includes the choice of one (1) Snap-On Module with FID, Operator's Manual, and Rechargeable Nickel Metal Hydride Battery.
- Get a Quote now!
Want more information? Learn more by reading our brochure! Open PDF File | Download PDF | Back to Portable
Specifications
| Species measured: | Sensor(s): | Precision: | Response time: |
| Total Organics (VOCs) including methane | single - FID only | +/- 1% of reading | <10 sec. to 90% response |
| Sample flow rate: | Span Drift: | Range: | Linear Range: |
| > 0.2 LPM | <2% over 8 hours | 1 to 50,000 ppm | To 50,000 ppm direct reading |
| Power consumption: | Dimensions: | Weight: | Instrument operating conditions: |
| < 0.75 watt maximum | 10'' L x 3'' W x 4.5'' H | 5 pounds | 5-40 degrees C, 0-95% RH (non-condensing) |
| Performance: | Battery operated: | Hydrogen | Zero Air |
| Isobutylene Referred | > 10 hours of operation | Disposable cylinder provides up to 15 hours of operation | Provided by charcoal filtered ambient air |
Features
| Headspace Software | Single piece construction | Carrying case | Ease of calibration |
| The accuracy of VOC measurements in soil and water is greatly improved with the built in software method. No operator interpolation is required. | The single piece construction (when the head and readout units are snapped together) of ABS plastic is very rugged and durable. | For analyzer and disposable hydrogen cylinder. | The two point calibration for the FID uses zero gas and a span gas. The time to calibrate is about 30 seconds. The Cal button is located on the main menu for ease of use. |
| Datalogging | Library | Display | ADC |
| Manual or automatic datalogging (7,000 points) is available. The 115 has a built in real time clock. Viewer software (Windows 98-XP compatible) comes with the 115. | There are libraries for the FID that are easily accessible. There are more than 200 response factors built into the 115. | Our 2 line by 16 character display can be backlit. The upper display provides the concentration and the bottom display provides the sensor, units, alarm and logging mode. | Our 16 bit ADC provides a resolution of 1 part in 64,000 and our signal algorithm minimizes noise by signal averaging in the msec range. |
| Programmable Voltage output | |||
| 0-1VDC | |||
Want more information? Learn more by reading our brochure! Open PDF File | Download PDF | Back to Portable