Model 301-C Process Gas Chromatograph
Click here to enlarge
- The Model 301-C PGCs are flexible and versatile Analyzers that are in their fourth generation.
- The addition of these new Analyzers greatly improves the capability and range of Process Analyzers from PID.
- Get a Quote now!
Want more information? Learn more by reading our brochure! Open PDF File | Download PDF | Back to Continuous
Specifications
| Detectors: | Species measured: | Detection Limit: | Linear Dynamic Range: |
| Photoionization detector (PID), Flame ionization detector (FID), Thermal conductivity detector (TCD), Flame photometric detector (FPD), Far UV absorbance (FUV) detector, Catalytic combustion detector (CCD). | PID & FID: Organics (VOCs by PID or FID) and inorganic species (H2S, NH3, AsH3… ) that can be ionized by the PID lamp (9.5, 10.6 or 11.7 eV) TCD: Universal detector- fixed gases (O2, N2, CO…), organic and inorganic compounds, very sensitive for H2, He, Xe FPD: Selective response for S or P compounds Far UV: Nearly universal response for organic and inorganic compounds CCD: Combustible compounds such as hydrocarbons |
PID - 0.5 ppb benzene FID - 50 ppb benzene TCD - H2- 10 ppm; O2 150 ppm |
PID - 108 FID - 2 x 106 TCD - 2 x 104 FPD- S - 103; P 105 Far UV - 106 CCD - 5 x 104 |
| Sensor(s): | Precision: | Response time: | Sample flow rate: |
| 1 or 2 detectors | +/- 1-2% of reading | Depends on retention times | > 1 LPM |
| Span Drift: | Zero Drift: | Power consumption: | Dimensions: |
| <1% over 24 hours | NA- autozero on each run | < 150 watts maximum; 115 VAC, 1.5 amps | 19'' Rack mount - 19'' W x 11''H x 14''D Wall - 22''W x 22''H x 17''D |
| Weight: | Instrument operating conditions: | ||
| 19'' Rack mount - 35 pounds Wall – NEMA 4- 55 pounds (fiberglass) |
5-40 degrees C, 0-95% RH (non-condensing) | ||
Features
| PID Lamps | FID | FPD | Enclosures |
| Our 9.5 and 10.6 eV lamps remain the best in the business since we developed them over 30 years ago. | Our very sensitive FID has flame out sensor that will shut off the hydrogen if the flame goes out. | Our very sensitive FPD has flame out sensor that will shut off the hydrogen if the flame goes out. | 19'' rack mount or NEMA 4 wall mount. |
| Ease of calibration - SemiAutomatic or Remote Automatic Display | PC | Operating system | Peak Detection & System Operation |
| Our 8” Color VGA display is easy to read. The display is a touch screen. | Pentium Computer with > 100 GByte hard drive & 1 GByte of RAM | Windows XP® embedded | Controlled by our 32 bit PeakWorks software program with more than 20 years of development. |
| ADC | Autoranging | Autozero | Programmable Voltage/current output |
| Our 16 bit ADCs provide a resolution of 1 part in 64,000 and our signal algorithm minimizes noise by signal averaging in the msec range; the ADC can acquire positive or negative signals. | We have 3 ranges with computer controlled autoranging- x1, x 10, x 100. | Beginning of each run. | 0-1VDC/4-20 mA (optional). |
| Digital outputs | Programmable setpoints | ||
| RS232, 10/100 network connection; RS485, MODBUS optional. | The low and high setpoints (depends on the options) can be customer programmed for each point and/or compound. | ||
Want more information? Learn more by reading our brochure! Open PDF File | Download PDF | Back to Continuous